C613-50631-01 Rev A Command Reference for IE340 Series 226
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
SERVICE
PASSWORD-ENCRYPTION
service password-encryption
Overview Use this command to enable password encryption. This is enabled by default.
When password encryption is enabled, the device displays passwords in the
running config in encrypted form instead of in plain text.
Use the no service password-encryption command to stop the device from
displaying newly-entered passwords in encrypted form. This does not change the
display of existing passwords.
Syntax
service password-encryption
no service password-encryption
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# service password-encryption
Validation
Commands
show running-config
Related
commands
enable password