Allied Telesis IE340 Series - show acl-group ip port

C613-50631-01 Rev A Command Reference for IE340 Series 2000
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV4 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
ACL-GROUP IP PORT
show acl-group ip port
Overview Use this command to show the port rules in a named port ACL group.
Syntax
show acl-group ip port <group>
Mode Privileged Exec
Example To show all port rules in a port ACL group PORT_GROUP1, use the command:
awplus# show acl-group ip port PORT_GROUP1
Output Figure 38-4: Example output from show acl-group ip port PORT_GROUP1
Related
commands
(acl-group ip port range)
acl-group ip port
Command
changes
Version 5.5.0-1.1: command added
Parameter Description
<group> The name of the port ACL group.
awplus#show acl-group ip port PORT_GROUP1
Port Group: PORT_GROUP1

eq 11
gt 20
lt 503
ne 500