C613-50631-01 Rev A Command Reference for IE340 Series 3406
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PING-POLLING COMMANDS
CLEAR
PING-POLL
clear ping-poll
Overview This command resets the specified ping poll, or all ping poll instances. This clears
the ping counters, and changes the status of polled devices to unreachable. The
polling instance changes to the polling frequency specified with the
critical-interval command. The device status changes to reachable once the device
responses have reached the up-count.
Syntax
clear ping-poll {<1-100>|all}
Mode Privileged Exec
Examples To reset the ping poll instance 12, use the command:
awplus# clear ping-poll 12
To reset all ping poll instances, use the command:
awplus# clear ping-poll all
Related
commands
active (ping-polling)
ping-poll
show ping-poll
Parameter Description
<1-100> A ping poll ID number. The specified ping poll instance has its
counters cleared, and the status of the device it polls is
changed to unreachable.
all Clears the counters and changes the device status of all polling
instances.
To Next Page
Loading...
Need help?
General
