C613-50631-01 Rev A Command Reference for IE340 Series 1363
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
CLEAR
BGP IPV6 DAMPENING (BGP4+ ONLY)
clear bgp ipv6 dampening (BGP4+ only)
Overview Use this command to clear route dampening information and unsuppress routes
that have been suppressed routes.
Syntax
clear bgp ipv6 dampening
[<ipv6-addr>|<ipv6-addr/prefix-length>]
Mode Privileged Exec
Examples
awplus# clear bgp ipv6 dampening 2001:0db8:010d::1
awplus# clear bgp ipv6 dampening 2001:0db8::/64
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
Parameter Description
<ipv6-addr> Specifies the IPv6 address for which BGP4+ dampening is to
be cleared, entered in hexadecimal in the format X:X::X:X.
<ipv6-addr/
prefix-length>
Specifies the IPv6 address and prefix-length for which BGP4+
dampening is to be cleared. The IPv6 address uses the format
X:X::X:X/Prefix-Length. The prefix-length is usually set
between 0 and 64.
To Next Page
Loading...
Need help?
General
