C613-50631-01 Rev A Command Reference for IE340 Series 1574
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP NEIGHBORS HOLD-TIME (BGP ONLY)
show ip bgp neighbors hold-time (BGP only)
Overview Use this command to display the configured holdtime value of the peer at the
session establishment time with the neighbor.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp neighbors <ipv4-addr> hold-time
Default The holdtime timer default is 90 seconds as per RFC 4271. Holdtime is keepalive * 3.
Mode User Exec and Privileged Exec
Examples
awplus# show ip bgp neighbors 10.11.4.26 hold-time
Related
commands
neighbor timers
show ip bgp neighbors keepalive-interval (BGP only)
timers (BGP)
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
To Next Page
Loading...
Need help?
General
