C613-50631-01 Rev A Command Reference for IE340 Series 2779
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
APPLICATION
-PROXY WHITELIST ADVERTISED-ADDRESS
application-proxy whitelist
advertised-address
Overview Use this command to register a Layer 3 interface, and the IPv4 address that is
attached to this interface, as the advertised application-proxy whitelist address for
a device.
Use the no variant of this command to stop advertising the Layer 3 interface and
its associated IPv4 address.
Syntax
application-proxy whitelist advertised-address <interface>
no application-proxy whitelist advertised-address
Default No address advertised by default.
Mode Global Configuration
Example To configure the IPv4 address attached to VLAN 1as the advertised address, use the
commands:
awplus# configure terminal
awplus(config)# application-proxy whitelist advertised-address
vlan1
To remove the advertised address, use the commands:
awplus# configure terminal
awplus(config)# no application-proxy whitelist
advertised-address
Related
commands
application-proxy whitelist server
show application-proxy whitelist advertised-address
Command
changes
Version 5.4.9-1.1: command added
Parameter Description
<interface> Layer 3 interface to configure as the advertised address.
To Next Page
Loading...
