Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1929
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
SHOW
DEBUGGING PIM DENSE-MODE
show debugging pim dense-mode
Overview This command displays the status of the debugging of the system.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show debugging pim dense-mode
Mode User Exec and Privileged Exec
Output Figure 37-3: Example output from the show debugging pim dense-mode
command
Related
commands
debug pim dense-mode all

PIM-DM Debugging status:
PIM-DM Decoder debugging is off
PIM-DM Encoder debugging is off
PIM-DM FSM debugging is off
PIM-DM MRT debugging is off
PIM-DM NHOP debugging is off
PIM-DM NSM debugging is off
PIM-DM VIF debugging is off

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English