Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 835
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE INTERFACE DETAIL
show power-inline interface detail
Overview This command displays detailed information for one or more Power over Ethernet
(PoE) ports.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show power-inline interface [<port-list>] detail
Mode User Exec and Privileged Exec
Usage notes The power allocated to each port is listed in the Power allocated row, and is
limited by the maximum power per Powered Device (PD) class, or a user
configured power limit.
Examples To display detailed PoE port specific information for the port range port1.0.5 to
port1.0.6, use the command:
awplus# show power-inline interface port1.0.5-port1.0.6 detail
Output Figure 20-5: Example output from show power-inline interface detail
Parameter Description
<port-list> Enter the PoE port(s) to display information about only the specified
port or ports.
awplus#show power-inline interface port1.0.5-1.0.6 detail

Interface port1.0.5
Powered device type: n/a
PoE admin: on
Configured Priority: Low
Actual Priority: Low
Detection status: Off
Powered pairs: Data

Interface port1.0.6
Powered device type: n/a
PoE admin: on
Configured Priority: Low
Actual Priority: Low
Detection status: Off
Powered pairs: Data

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English