C613-50631-01 Rev A Command Reference for IE340 Series 1137
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPF COMMANDS
ENABLE
DB-SUMMARY-OPT
enable db-summary-opt
Overview This command enables OSPF database summary list optimization.
The no variant of this command disables database summary list optimization.
Syntax
enable db-summary-opt
no enable db-summary-opt
Default The default setting is disabled.
Mode Router Configuration
Usage When this feature is enabled, the database exchange process is optimized by
removing the LSA from the database summary list for the neighbor, if the LSA
instance in the database summary list is the same as, or less recent than, the listed
LSA in the database description packet received from the neighbor.
Examples To enable OSPF database summary list optimization, use the commands:
awplus# configure terminal
awplus(config)# router ospf
awplus(config-router)# enable db-summary-opt
To disable OSPF database summary list optimization, use the commands:
awplus# configure terminal
awplus(config)# router ospf
awplus(config-router)# no enable db-summary-opt
Validation
Commands
show running-config
To Next Page
Loading...
Need help?
General
