C613-50631-01 Rev A Command Reference for IE340 Series 1094
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RIPNG FOR IPV6 COMMANDS
SHOW
DEBUGGING IPV6 RIP
show debugging ipv6 rip
Overview Use this command to see what debugging is turned on for RIPng options such as:
nsm debugging, RIPng event debugging, RIPng packet debugging, and RIPng nsm
debugging.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show debugging ipv6 rip
Mode User Exec and Privileged Exec
Usage notes Use this command to display the debug status of RIPng.
Example To display the RIPng debugging status, use the following command:
awplus# show debugging ipv6 rip
To Next Page
Loading...
