Allied Telesis IE340 Series - show atmf secure-mode sa

C613-50631-01 Rev A Command Reference for IE340 Series 3006
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF SECURE-MODE SA
show atmf secure-mode sa
Overview Use this command to display the security associations on the network. This is the
list of links and neighbors that are trusted.
Syntax
show atmf secure-mode sa [detail] [link|neighbor|broadcast]
Mode Privileged Exec
Example To display an overview of AMF secure mode security associations on a master or
member node, use the command:
awplus# show atmf secure-mode sa
To display a detailed overview of AMF secure mode neighbor security associations
on a master or member node, use the command:
awplus# show atmf secure-mode sa detail neighbor
Output Figure 57-39: Example output from show atmf secure-mode sa
Parameter Description
detail Display detailed security association information.
link Display security associations for type links.
neighbor Display security associations for type neighbors.
broadcast Display security associations for type broadcast.
ATMF Security Associations:

Type State ID Details
--------------------------------------------------------------------------------
Neighbor Node Complete 175 master_1 
Broadcast Complete 4095 
CrossLink Complete 4501 sa1 
AreaLink Cert Exchg 4511 sa11 
Link Complete 6009 port1.2.9 
AreaLink CA Exchg Init 6013 port1.2.13 
AreaLink Cert Exchg 13001 port1.9.1 
Link CA Exchg Init 16779521 vlink3 
Neighbor Gateway Complete 83 master_2 
Neighbor Gateway Complete 175 master_1 
Neighbor Cntl-Master Complete 83 master_2 
Neighbor Cntl-Master Complete 175 master_1