Allied Telesis IE340 Series - show ip igmp proxy

C613-50631-01 Rev A Command Reference for IE340 Series 1701
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IGMP AND IGMP SNOOPING COMMANDS
SHOW
IP IGMP PROXY
show ip igmp proxy
Overview Use this command to display the state of IGMP Proxy services for a specified
interface or for all interfaces.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip igmp proxy
Mode User Exec and Privileged Exec
Example To display the state of IGMP Proxy services for all interfaces, enter the command:
awplus# show ip igmp proxy
Output Figure 32-4: Example output from show ip igmp proxy
Related
commands
ip igmp proxy-service
awplus#show ip igmp proxy
Interface vlan40 (Index 340)
Administrative status: enabled
Operational status: up
Upstream interface is vlan30
Number of multicast groups: 1