Allied Telesis IE340 Series - show debugging lacp

C613-50631-01 Rev A Command Reference for IE340 Series 796
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LINK AGGREGATION COMMANDS
SHOW
DEBUGGING LACP
show debugging lacp
Overview Use this command to see what debugging is turned on for LACP management.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging lacp
Mode User Exec and Privileged Exec
Example
awplus# show debugging lacp
Output Figure 19-1: Example output from the show debugging lacp command
Related
commands
debug lacp
LACP debugging status:
LACP timer debugging is on
LACP timer-detail debugging is on
LACP cli debugging is on
LACP packet debugging is on
LACP event debugging is on
LACP sync debugging is on