Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 832
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE INTERFACE
show power-inline interface
Overview This command displays a summary of Power over Ethernet (PoE) information for
specified ports. If no ports are specified then PoE information is displayed for all
ports.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show power-inline interface [<port-list>]
Mode User Exec and Privileged Exec
Example To display the PoE port-specific information for all PoE ports on the switch, use the
following command:
awplus# show power-inline interface
To display the PoE port specific information for port1.0.5 to port1.0.7, use the
following command:
awplus# show power-inline interface port1.0.5-port1.0.7
Output Figure 20-4: Example output from show power-inline interface
Parameter Description
<port-list> Enter the PoE port(s) to display PoE specific information in the show
output.
awplus#show power-inline interface
Interface Admin Pri Oper Power Device Class Max
(mW) (mW)
port1.0.5 Enabled Low Off 0 n/a n/a n/a
port1.0.6 Enabled Low Off 0 n/a n/a n/a
port1.0.7 Enabled Low Off 0 n/a n/a n/a
port1.0.8 Enabled Low Off 0 n/a n/a n/a
port1.0.9 Enabled Low Off 0 n/a n/a n/a
port1.0.10 Enabled Low Off 0 n/a n/a n/a
port1.0.11 Enabled Low Off 0 n/a n/a n/a
port1.0.12 Enabled Low Powered 1800 n/a 0 15400 [C]
port1.0.13 Enabled Low Off 0 n/a n/a n/a

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English