Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1244
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
DISTRIBUTE
-LIST (IPV6 OSPF)
distribute-list (IPv6 OSPF)
Overview Use this command to apply filtering to the transfer of routing information between
OSPFv3 and the IPv6 route table.
The entities that are used to perform filtering are ACLs (Access Control Lists), which
match on certain attributes in the routes that are being transferred. For
information about ACLs, see the ACL Feature Overview and Configuration Guide.
Use the no variant of this command to disable this feature for networks as defined
in an associated access-list.
Syntax
distribute-list <access-list> in
no distribute-list [<access-list>] in
distribute-list <access-list> out {connected|ospf
[<process-tag>]|rip|static}
no distribute-list <access-list> out {connected|ospf
[<process-tag>]|rip|static}
Default Disabled
Mode Router Configuration
Usage notes This command applies filtering to the transfer of routing information between
OSPFv3 and the IPv6 route table. You can apply filtering in either direction, from
OSPFv3 to the IPv6 route table using an in distribute-list, or from the IPv6 route
table to OSPFv3 using an out distribute-list.
The effect of an in filter is that some route information that OSPFv3 has learned
from LSA updates will not be installed into the IPv6 route table. The effect of an out
filter is that some route information that could be redistributed to OSPFv3 will not
be redistributed to OSPFv3.
Parameter Description
<access-list> Specifies the IPv6 access-list number or name to use. The
specified access list defines which networks are received and
which are suppressed.
in Indicates that this applies to incoming advertised routes.
out Indicates that this applies to outgoing advertised routes.
connected Specify the redistribution of connected routes.
ospf Specify the redistribution of OSPFv3 routes.
<process-tag> Optionally specify an OSPFv3 process tag for OSPFv3 routes.
rip Specify the redistribution of RIPng routes.
static Specify the redistribution of connected routes.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English