28
C613-50631-01 Rev A Command Reference for IE340 Series 1102
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPF Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
OSPF. For more information, see the OSPF Feature Overview and Configuration
Guide.
Command List •“area default-cost” on page 1105
•“area authentication” on page 1106
•“area filter-list” on page 1107
•“area nssa” on page 1108
•“area range” on page 1110
•“area stub” on page 1112
•“area virtual-link” on page 1113
•“auto-cost reference bandwidth” on page 1116
•“bandwidth” on page 1118
•“capability opaque” on page 1119
•“capability restart” on page 1120
•“clear ip ospf process” on page 1121
•“compatible rfc1583” on page 1122
•“debug ospf events” on page 1123
•“debug ospf ifsm” on page 1124
•“debug ospf lsa” on page 1125
•“debug ospf nfsm” on page 1126
•“debug ospf nsm” on page 1127
•“debug ospf packet” on page 1128
To Next Page
Loading...
Need help?
General
