29
C613-50631-01 Rev A Command Reference for IE340 Series 1210
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFv3 for IPv6
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
OSPFv3 for IPv6. See the OSPFv3 Feature Overview and Configuration Guide for
more information and examples.
Command List •“abr-type” on page 1213
•“area authentication ipsec spi” on page 1214
•“area default-cost (IPv6 OSPF)” on page 1216
•“area encryption ipsec spi esp” on page 1217
•“area range (IPv6 OSPF)” on page 1220
•“area stub (IPv6 OSPF)” on page 1222
•“area virtual-link (IPv6 OSPF)” on page 1223
•“area virtual-link authentication ipsec spi” on page 1225
•“area virtual-link encryption ipsec spi” on page 1227
•“auto-cost reference bandwidth (IPv6 OSPF)” on page 1230
•“bandwidth” on page 1232
•“clear ipv6 ospf process” on page 1233
•“debug ipv6 ospf events” on page 1234
•“debug ipv6 ospf ifsm” on page 1235
•“debug ipv6 ospf lsa” on page 1236
•“debug ipv6 ospf nfsm” on page 1237
•“debug ipv6 ospf packet” on page 1238
•“debug ipv6 ospf route” on page 1239
•“default-information originate” on page 1240
To Next Page
Loading...
Need help?
General
