C613-50631-01 Rev A Command Reference for IE340 Series 2048
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
IP ACCESS-LIST
show ip access-list
Overview Use this command to display IP access-lists.
Syntax
show ip access-list
[<1-99>|<100-199>|<1300-1999>|<2000-2699>|<access-list-name>]
Mode User Exec and Privileged Exec
Example
awplus# show ip access-list
Output Figure 39-3: Example output from the show ip access-list command
Parameter Description
<1-99> IP standard access-list.
<100-199> IP extended access-list.
<1300-1999> IP standard access-list (expanded range).
<2000-2699> IP extended access-list (expanded range).
<access-list-name> IP named access-list.
Standard IP access-list 1ď€
permit 172.168.6.0, wildcard bits 0.0.0.255ď€
permit 192.168.6.0, wildcard bits 0.0.0.255
To Next Page
Loading...
Need help?
General
