C613-50631-01 Rev A Command Reference for IE340 Series 708
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SPANNING TREE COMMANDS
REVISION
(MSTP)
revision (MSTP)
Overview Use this command to specify the MST revision number to be used in the
configuration identifier.
Use this command for MSTP only.
Syntax
revision <revision-number>
Default The default of revision number is 0.
Mode MST Configuration
Usage The region name, the revision number, and the digest of the VLAN to MSTI
configuration table must be the same on all devices that are intended to be in the
same MST region.
Example
awplus# configure terminal
awplus(config)# spanning-tree mst configuration
awplus(config-mst)# revision 25
Related
commands
region (MSTP)
show spanning-tree mst config
instance vlan (MSTP)
Parameter Description
<revision-number> <0-65535> Revision number.
To Next Page
Loading...
Need help?
General
