C613-50631-01 Rev A Command Reference for IE340 Series 1704
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IGMP AND IGMP SNOOPING COMMANDS
SHOW
IP IGMP SNOOPING MROUTER
show ip igmp snooping mrouter
Overview Use this command to display the multicast router ports, both static and dynamic,
in a VLAN.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip igmp snooping mrouter [interface <interface>]
Mode User Exec and Privileged Exec
Example To show all multicast router interfaces, use the command:
awplus# show ip igmp snooping mrouter
To show the multicast router interfaces in vlan1, use the command:
awplus# show ip igmp snooping mrouter interface vlan1
Output Figure 32-7: Example output from show ip igmp snooping mrouter
Figure 32-8: Example output from show ip igmp snooping mrouter interface
vlan1
Related
commands
ip igmp snooping mrouter
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
Parameter Description
interface A specific interface.
<interface> The name of the VLAN interface.
VLAN Interface Static/Dynamicď€
1 port1.0.1 Statically configuredď€
200 port1.0.2 Statically configured
VLAN Interface Static/Dynamicď€
1 port1.0.1 Statically configured
To Next Page
Loading...
Need help?
General
