Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3160
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PRECISION TIME PROTOCOL (PTP) AND TRANSPARENT CLOCK COMMANDS
SHOW
PTP DATA TRANSPARENT
show ptp data transparent
Overview Use this command to display configuration information for the PTP transparent
clock.
Syntax
show ptp data transparent
Mode Privileged Exec
Example To display configuration for PTP transparent clock, use the following command:
awplus# show ptp data transparent
Output Figure 61-1: Example output from show ptp data transparent
Related
commands
ptp-clk
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.8-0.2: added to x230, x550 series products
IE300-1#show ptp data transparent
CLOCK(Transparent)
Global Enable : Enabled
Clock Identity : 00:0c:25:ff:fe:03:92:47
Number Of Ports : 2
Transport Type : Ethernet
Delay Mechanism : End To End
Primary Domain : 0
Step-type : One Step

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English