Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2159
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
SHOW
MLS QOS MAPS PREMARK-DSCP
show mls qos maps premark-dscp
Overview This command displays the premark-dscp map. This map is used to replace the
DSCP, CoS and/or bandwidth class of a packet matching the class-map, based on a
lookup DSCP value.
Syntax
show mls qos maps premark-dscp [<0-63>]
Mode User Exec and Privileged Exec
Example To display the premark-dscp map for DSCP 1, use the command:
awplus# show mls qos maps premark-dscp 1
Output Figure 42-9: Example output from the show mls qos maps premark-dscp
command
Related
commands
mls qos map premark-dscp
trust dscp
Parameter Description
<0-63> DSCP table entry.
PREMARK-DSCP-MAP:

DSCP 1
Bandwidth Class 
-------------------------
New DSCP 2 
New CoS 0
New Bandwidth Class green

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English