C613-50631-01 Rev A Command Reference for IE340 Series 3385
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TRIGGER COMMANDS
TRIGGER
ACTIVATE
trigger activate
Overview This command is used to manually activate a specified trigger from the Privileged
Exec mode, which has been configured with the trigger command from the Global
Configuration mode.
Syntax
trigger activate <1-250>
Mode Privileged Exec
Usage notes This command manually activates a trigger without the normal trigger conditions
being met.
The trigger is activated even if it has been configured as inactive by using the
command no active. The scripts associated with the trigger will be executed even
if the trigger is in the diagnostic test mode.
Triggers activated manually do not have their repeat counts decremented or their
'last triggered' time updated, and do not result in updates to the '[type] triggers
today' counters.
Example To manually activate trigger 12 use the command:
awplus# trigger activate 12
Related
commands
active (trigger)
show trigger
trigger
Parameter Description
<1-250> A trigger ID.
To Next Page
Loading...
Need help?
General
