C613-50631-01 Rev A Command Reference for IE340 Series 2297
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AUTHENTICATION COMMANDS
AUTH
-WEB-SERVER PAGE LOGO
auth-web-server page logo
Overview This command sets the type of logo that will be displayed on the web
authentication page.
Use the no variant of this command to set the logo type to auto.
Note that if you need to customize the login page extensively, you can instead
replace it with your own page. See “Customising the Login Page” in the AAA and
Port Authentication Feature Overview and Configuration Guide.
Syntax
auth-web-server page logo {auto|default|hidden}
no auth-web-server page logo
Default Logo type is auto by default.
Mode Global Configuration
Examples To display the default logo with ignoring installed custom logo, use the
commands:
awplus# configure terminal
awplus(config)# auth-web-server page logo default
To set back to the default logo type auto, use the commands:
awplus# configure terminal
awplus(config)# no auth-web-server page logo
Validation
Commands
show auth-web-server page
Parameter Description
auto Display the custom logo if installed; otherwise display the
default logo
default Display the default logo
hidden Hide the logo
To Next Page
Loading...
Need help?
General
