Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1832
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
SHOW
IP PIM SPARSE-MODE LOCAL-MEMBERS
show ip pim sparse-mode local-members
Overview Use this command to show detailed local member information on an interface
configured for PIM-SM. If you do not specify an interface then detailed local
member information is shown for all interfaces configured for PIM-SM.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim sparse-mode local-members [<interface>]
Mode User Exec and Privileged Exec
Example To show detailed PIM-SM information for all PIM-SM configured interfaces, use the
command:
awplus# show ip pim sparse-mode local-members
To show detailed PIM-SM information for the PIM-SM configured interface vlan1,
use the command:
awplus# show ip pim sparse-mode local-members vlan1
Output Figure 35-8: Example output from the show ip pim sparse-mode
local-members command
Output Figure 35-9: Example output from the show ip pim sparse-mode
local-members command on a specific interface.
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
Parameter Description
<interface> Optional. Specify the interface.
awplus#show ip pim sparse-mode local-members 
PIM Local membership information 

vlan1: 
(*, 224.0.0.4) : Include 

vlan203: 
(*, 223.0.0.3) : Include
awplus#show ip pim sparse-mode local-members vlan1 
PIM Local membership information 

vlan1: 
(*, 224.0.0.4) : Include

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English