EasyManuals Logo

Allied Telesis IE340 Series User Manual

Allied Telesis IE340 Series
3474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2360 background imageLoading...
Page #2360 background image
C613-50631-01 Rev A Command Reference for IE340 Series 2360
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AAA COMMANDS
AAA
AUTHENTICATION DOT1X
aaa authentication dot1x
Overview Use this command to enable IEEE 802.1X-based authentication globally and to
allow you to enable either the default authentication method list (in this case, a list
of RADIUS servers), which is automatically applied to every interface running IEEE
802.1X-based authentication, or a user named authentication method list, which is
applied to an interface with the dot1x authentication command.
Use the no variant of this command to disable either the default or a named
method list for 802.1X-based authentication. Once all method lists are disabled
802.1x-based authentication is disabled globally.
Syntax
aaa authentication dot1x {default|<list-name>} group
{<group-name>|radius}
no aaa authentication dot1x {default|<list-name>}
Default 802.1X-based Port Authentication is disabled by default.
Mode Global Configuration
Usage notes This command can be used to configure either the default authentication method
list or a named authentication method list:
• default: the default authentication method list which is automatically
applied to all interfaces with 802.1X-based authentication enabled.
• <list-name>: a user named list which can be applied to an interface using the
aaa authentication dot1x command.
There are two ways to define servers where RADIUS accounting messages are sent:
• group radius: use all RADIUS servers configured by radius-server host
command
• group <group-name>: use the specified RADIUS server group configured
with the aaa group server command
Examples To enable 802.1X-based authentication globally with all RADIUS servers, and use
all available RADIUS servers, use the command:
awplus# configure terminal
awplus(config)# aaa authentication dot1x default group radius
Parameter Description
default Configure the default authentication method list
<list-name> Configure a named authentication method list
group Use a server group
<group-name> Server group name.
radius Use all RADIUS servers.

Table of Contents

Other manuals for Allied Telesis IE340 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis IE340 Series and is the answer not in the manual?

Allied Telesis IE340 Series Specifications

General IconGeneral
BrandAllied Telesis
ModelIE340 Series
CategorySwitch
LanguageEnglish

Related product manuals