Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2762
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MEDIA REDUNDANCY PROTOCOL (MRP) COMMANDS
SHOW
MRP PORTS
show mrp ports
Overview Use this command to show a summary of all ports that are configured for MRP
rings.
Syntax
show mrp ports
Mode User Exec
Example To show a summary of the ports configured for MRP rings, use the command:
awplus# show mrp ports
Output Figure 56-5: Example output from show mrp ports
Related
commands
mrp ring
Command
changes
Version 5.5.0-2.1: command added
awplus#show mrp ports
Media Redundancy Protocol - Port Information

Connection Port State
------------------------------------------
Ring 1 port1.0.23 Blocking
Ring 1 port1.0.24 Forwarding
Table 56-3: Parameters in the output from show mrp ports
Parameter Description
Connection The name of the MRP ring.
Port The ID of the port.
State The state of the port:
Disabled - all packets received by the port are dropped.
Blocking - all packets received by the port are dropped,
with the exception of MRP protocol packets.
Forwarding - all packets received by the port are
forwarded.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English