C613-50631-01 Rev A Command Reference for IE340 Series 2718
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
G
8032 PROFILE
g8032 profile
Overview Use this command to create a G.8032 Ethernet Ring Protection (ERP) instance
profile, or to enter that instance's profile context.
Use the no variant of this command to destroy the specified instance.
Syntax
g8032 profile {<erp-profile-name>|default-profile}
no g8032 profile <erp-profile-name>
Default A profile with the name "default-profile" will exist in the system and is used by
default by an ERP instance. All the parameters in the default profile take on the
default values.
Mode Global Configuration
Example To enter the context of a profile named “prof_1”, use the following commands:
awplus(config)# g8032 profile prof_1
awplus(g8032-profile-config)#
Related
commands
enable (g8032-profile)
profile name
show g8032 profile
timer (g8032-profile)
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.7-1.1: added to x310 series products
Version 5.4.7-2.1: added to x550 series products
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
Parameter Description
<erp-profile-name> The name of the G.8032 profile. This can be up to 32
characters.
default-profile The name of the system's default profile for G.8032. This
profile is created by the system automatically and can not
be destroyed.
To Next Page
Loading...
Need help?
General
