Allied Telesis IE340 Series - show vlan access-map

C613-50631-01 Rev A Command Reference for IE340 Series 651
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
SHOW
VLAN ACCESS-MAP
show vlan access-map
Overview Use this command to display information about the configured VLAN
access-maps. VLAN access-maps contain a series of ACLs and enable you to filter
traffic ingressing specified VLANs.
Syntax
show vlan access-map [<name>]
Mode User Exec/Privileged Exec
Example To display the ACLs in all access-maps, use the command:
awplus# show vlan access-map
Output Figure 16-6: Example output from show vlan access-map
Related
commands
vlan access-map
Command
changes
Version 5.4.6-2.1: command added
Parameter Description
<name> The name of the access-map to display.
awplus#show vlan access-map 

Vlan access map : deny_all 
Hardware MAC access list 4000
10 deny any any 

Vlan access map : ip_range 
Hardware IP access list 3000
10 deny ip 192.168.1.1/24 any