C613-50631-01 Rev A Command Reference for IE340 Series 2312
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AUTHENTICATION COMMANDS
AUTH
-WEB-SERVER SESSION-KEEP
auth-web-server session-keep
Overview This command enables the session-keep feature to jump to the original URL after
being authorized by Web-Authentication.
Use the no variant of this command to disable the session keep feature.
Syntax
auth-web-server session-keep
no auth-web-server session-keep
Default The session-keep feature is disabled by default.
Mode Global Configuration
Usage notes This function doesn't ensure to keep session information in all cases.
Authenticated supplicant may be redirected to unexpected page when
session-keep is enabled. This issue occurred by supplicant sending HTTP packets
automatically after authentication page is displayed and the URL is written.
Examples To enable the session-keep feature, use the following commands:
awplus# configure terminal
awplus(config)# auth-web-server session-keep
To disable the session-keep feature, use the following commands:
awplus# configure terminal
awplus(config)# no auth-web-server session-keep
Validation
Commands
show auth
show auth-web-server
show running-config
To Next Page
Loading...
Need help?
General
