Allied Telesis IE340 Series - service mrp

C613-50631-01 Rev A Command Reference for IE340 Series 2756
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MEDIA REDUNDANCY PROTOCOL (MRP) COMMANDS
SERVICE
MRP
service mrp
Overview Use this command to enable the Media Redundancy Protocol (MRP) service. This is
required before any other MRP configuration can be entered.
Use the no variant of this command to disable the MRP service.
Syntax
service mrp
no service mrp
Default The MRP service is disabled.
Mode Global Configuration
Example To enable the MRP service, use the commands:
awplus# configure terminal
awplus(config)# service mrp
To disable the MRP service, use the commands:
awplus# configure terminal
awplus(config)# no service mrp
Related
commands
mrp ring
Command
changes
Version 5.5.0-2.1: command added