C613-50631-01 Rev A Command Reference for IE340 Series 1932
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
SHOW
IP PIM DENSE-MODE INTERFACE DETAIL
show ip pim dense-mode interface detail
Overview This command displays detailed information on a PIM-DM interface.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show ip pim dense-mode interface detail
Mode User Exec and Privileged Exec
Example
awplus# show ip pim dense-mode interface detail
Output Figure 37-4: Example output from the show ip pim dense-mode interface
detail command
vlan2 (vif-id: 0):
Address 192.168.1.53/24
Hello period 30 seconds, Next Hello in 30 seconds
Neighbors:
192.168.1.152/32
192.168.1.149/32
vlan3 (vif-id: 2):
Address 192.168.10.53/24
Hello period 30 seconds, Next Hello in 8 seconds
Neighbors: none
To Next Page
Loading...
