C613-50631-01 Rev A Command Reference for IE340 Series 425
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
LOG
BUFFERED SIZE
log buffered size
Overview This command configures the amount of memory that the buffered log is
permitted to use. Once this memory allocation has been filled old messages will be
deleted to make room for new messages.
Use the no variant of this command to return to the default.
Syntax
log buffered size <50-250>
no log buffered size
Default 50 kilobytes
Mode Global Configuration
Example To allow the buffered log to use up to 100 kilobytes of RAM, use the commands:
awplus# configure terminal
awplus(config)# log buffered size 100
To return to the default value, use the commands:
awplus# configure terminal
awplus(config)# no log buffered size
Related
commands
clear log buffered
copy buffered-log
default log buffered
log buffered
log buffered (filter)
log buffered exclude
show log
show log config
Parameter Description
<50-250> Size of the RAM log in kilobytes
To Next Page
Loading...
Need help?
General
