C613-50631-01 Rev A Command Reference for IE340 Series 1822
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
IP
PIM SPARSE-MODE WRONG-VIF-SUPPRESSION
ip pim sparse-mode wrong-vif-suppression
Overview Use this command to permit or block multicast packets that arrive on the wrong
interface.
Use the no variant of this command to disable wrong VIF suppression.
Syntax
ip pim sparse-mode wrong-vif-suppression
no ip pim sparse-mode wrong-vif-suppression
Default Disabled.
Mode Global Configuration
Usage notes This command enables wrong VIF suppression for PIM sparse-mode. Wrong VIF
suppression prevents multicast packets received on the wrong upstream interface
from being copied to the CPU.
Examples To enable wrong VIF suppression, use the commands:
awplus# configure terminal
awplus(config)# ip pim sparse-mode wrong-vif-suppression
To disable wrong VIF suppression, use the commands:
awplus# configure terminal
awplus(config)# no ip pim sparse-mode wrong-vif-suppression
Related
commands
ip pim sparse-mode join-prune-batching
Command
changes
Version 5.4.8-2.3: command added.
To Next Page
Loading...
Need help?
General
