Allied Telesis IE340 Series - help

C613-50631-01 Rev A Command Reference for IE340 Series 124
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CLI NAVIGATION COMMANDS
HELP
help
Overview This command displays a description of the AlliedWare Plus™ OS help system.
Syntax
help
Mode All command modes
Example To display a description on how to use the system help, use the command:
awplus# help
Output Figure 1-1: Example output from the help command
When you need help at the command line, press '?'.

If nothing matches, the help list will be empty. Delete 
characters until entering a '?' shows the available options.

Enter '?' after a complete parameter to show remaining valid 
command parameters (e.g. 'show ?').

Enter '?' after part of a parameter to show parameters that 
complete the typed letters (e.g. 'show ip?').