C613-50631-01 Rev A Command Reference for IE340 Series 2137
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
NO
POLICE
no police
Overview Use this command to disable any policer previously configured on the class-map.
Syntax
no police
Mode Policy Map Class Configuration
Usage notes This command disables any policer previously configured on the class-map.
Example To disable policing on a class-map, use the commands:
awplus# configure terminal
awplus(config)# policy-map name
awplus(config-pmap)# class classname
awplus(config-pmap-c)# no police
Related
commands
police single-rate action
police twin-rate action
To Next Page
Loading...
