C613-50631-01 Rev A Command Reference for IE340 Series 1853
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SMV6 COMMANDS
DEBUG
IPV6 PIM SPARSE-MODE TIMER
debug ipv6 pim sparse-mode timer
Overview Use this command to enable debugging for the specified PIM-SMv6 timers.
Use the no variants of this command to disable debugging for the specified
PIM-SMv6 timers.
Syntax
debug ipv6 pim sparse-mode timer assert [at]
no debug ipv6 pim sparse-mode timer assert [at]
debug pim ipv6 sparse-mode timer bsr [bst|crp]
no debug pim ipv6 sparse-mode timer bsr [bst|crp]
debug pim ipv6 sparse-mode timer hello [ht|nlt|tht]
no debug pim ipv6 sparse-mode timer hello [ht|nlt|tht]
debug pim ipv6 sparse-mode timer joinprune [jt|et|ppt|kat|ot]
no debug pim ipv6 sparse-mode timer joinprune
[jt|et|ppt|kat|ot]
debug pim ipv6 sparse-mode timer register [rst]
no debug pim ipv6 sparse-mode timer register [rst]
Parameter Description
assert Enable or disable debugging for the Assert timers.
at Enable or disable debugging for the Assert Timer.
bsr Enable or disable debugging for the specified Bootstrap Router timer, or
all Bootstrap Router timers.
bst Enable or disable debugging for the Bootstrap Router: Bootstrap Timer.
crp Enable or disable debugging for the Bootstrap Router: Candidate-RP
Timer.
hello Enable or disable debugging for the specified Hello timer, or all Hello
timers.
ht Enable or disable debugging for the Hello timer: Hello Timer.
nlt Enable or disable debugging for the Hello timer: Neighbor Liveness
Timer.
tht Enable or disable debugging for the Hello timer: Triggered Hello Timer.
joinprune Enable or disable debugging for the specified JoinPrune timer, or all
JoinPrune timers.
jt Enable or disable debugging for the JoinPrune timer: upstream Join
Timer.
et Enable or disable debugging for the JoinPrune timer: Expiry Timer.
ppt Enable or disable debugging for the JoinPrune timer: PrunePending
Timer.
To Next Page
Loading...
Need help?
General
