C613-50631-01 Rev A Command Reference for IE340 Series 1933
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
SHOW
IP PIM DENSE-MODE MROUTE
show ip pim dense-mode mroute
Overview Use this command to display the IP PIM-DM multicast routing table.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show ip pim dense-mode mroute
Mode User Exec and Privileged Exec
Example
awplus# show ip pim dense-mode mroute
Output Figure 37-5: Example output from the show ip pim dense-mode mroute
command
PIM-DM Multicast Routing Table
(192.168.10.52, 224.1.1.1)
Source directly connected on vlan3
State-Refresh Originator State: Originator
Upstream IF: vlan3, State: Forwarding
Downstream IF List:
vlan2, in 'olist':
Downstream State: NoInfo
Assert State: NoInfo
To Next Page
Loading...
