Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1782
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MULTICAST COMMANDS
SHOW
IPV6 MIF
show ipv6 mif
Overview Use this command to display the contents of the IPv6 Multicast Routing
Information Base (MRIB) MIF table.
Syntax
show ipv6 mif [<interface>]
Mode User Exec and Privileged Exec
Example
awplus# show ipv6 mif
awplus# show ipv6 mif vlan2
Output Figure 34-8: Example output from the show ipv6 mif command
Figure 34-9: Example output from the show ipv6 mif command with the
interface parameter specified
Parameter Description
<interface> The interface to display information about.
awplus#show ipv6 mif 
Interface Mif Owner Uptime 
Idx Module 
vlan3 0 MLD/MLD Proxy-Service 03:28:48 
vlan2 1 MLD/MLD Proxy-Service 03:28:48 
vlan1 2 MLD/MLD Proxy-Service 03:28:48 
Interface Mif Owner TTL Remote Uptime
Idx Module Address
vlan2 0 PIM-SMv6 1 0.0.0.0 00:05:17

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English