Allied Telesis IE340 Series - trust dscp

C613-50631-01 Rev A Command Reference for IE340 Series 2169
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
TRUST
DSCP
trust dscp
Overview This command enables the premark-dscp map to replace the DSCP,
bandwidth-class and/or CoS of classified traffic based on a lookup DSCP value.
With the no variant of this command, no premark-dscp mapping function will be
applied for the selected class-map. QoS components of the packet existing either
at ingress, or applied by the class-map, will pass unchanged.
Syntax
trust dscp
no trust
Mode Policy-Map Configuration
Examples To enable the premark-dscp map lookup for policy-map pmap1, use the
commands:
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)# trust dscp
To disable the premark-dscp map lookup for policy-map pmap1, use the
commands:
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)# no trust
Related
commands
mls qos map premark-dscp