46
C613-50631-01 Rev A Command Reference for IE340 Series 2397
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Lightweight
Directory Access
Protocol (LDAP)
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
Lightweight Directory Access Protocol (LDAP).
LDAP is an authentication protocol that facilitates user access to various IT
resources e.g. applications, servers, networking equipment, and file servers.
It can be used to connect to internal networks over OpenVPN. Although both LDAP
and RADIUS are interchangeable on AlliedWare Plus devices as an authentication
protocol, LDAP is added because of its ability to interact with directory services
such as Microsoft's Active Directory (AD).
For more information, see the LDAP Feature Overview and Configuration Guide.
Command List •“authentication (ldap-server)” on page 2399
•“base-dn” on page 2401
•“bind authenticate root-dn” on page 2402
•“deadtime (ldap-server)” on page 2403
•“debug ldap client” on page 2404
•“group-attribute” on page 2406
•“group-dn” on page 2407
•“host (ldap-server)” on page 2408
•“ldap-server” on page 2410
•“login-attribute” on page 2412
•“port (ldap-server)” on page 2414
•“retransmit (ldap-server)” on page 2415
•“search-filter” on page 2416
•“secure cipher (ldap-server)” on page 2418
To Next Page
Loading...
Need help?
General
