Allied Telesis IE340 Series - atmf secure-mode certificate expire

C613-50631-01 Rev A Command Reference for IE340 Series 2863
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
SECURE-MODE CERTIFICATE EXPIRE
atmf secure-mode certificate expire
Overview Use this command on an AMF master to expire a secure mode certificate. Running
this command will force the removal of the AMF node from the network.
Syntax
atmf secure-mode certificate expire <node-name> [area
<area-name>]
Mode Privileged Exec
Example To remove an AMF node named “node3” from an AMF network, use the following
command on the AMF master:
awplus# atmf secure-mode certificate expire node3
To remove an AMF node named “node2” in an area named “area2”, use the
following command on the AMF master:
awplus# atmf secure-mode certificate expire node2 area area2
Related
commands
atmf secure-mode
show atmf secure-mode
show atmf secure-mode certificates
Command
changes
Version 5.4.7-0.3: command added
Parameter Description
<node-name> Name of the AMF node you want to expire the certificate for.
area Specify an AMF area.
<area-name> Name of the AMF area you want to expire the AMF nodes
certificate for.