C613-50631-01 Rev A Command Reference for IE340 Series 218
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
SECURITY
-PASSWORD FORCED-CHANGE
security-password forced-change
Overview This command specifies whether or not a user is forced to change an expired
password at the next login. If this feature is enabled, users whose passwords have
expired are forced to change to a password that must comply with the current
password security rules at the next login.
Note that to use this command, the lifetime feature must be enabled with the
security-password lifetime command and the reject-expired-pwd feature must be
disabled with the security-password reject-expired-pwd command.
The no variant of the command disables this feature.
Syntax
security-password forced-change
no security-password forced-change
Default The forced-change feature is disabled by default.
Mode Global Configuration
Example To force a user to change their expired password at the next login, use the
command:
awplus# configure terminal
awplus(config)# security-password forced-change
Related
commands
security-password history
security-password lifetime
security-password min-lifetime-enforce
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
security-password warning
show running-config security-password
show security-password configuration
show security-password user
To Next Page
Loading...
Need help?
General
