Allied Telesis IE340 Series - Dynamic Host Configuration Protocol (DHCP) Commands; Introduction

58
C613-50631-01 Rev A Command Reference for IE340 Series 3035
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Dynamic Host
Configuration
Protocol (DHCP)
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the DHCP Feature Overview and Configuration Guide.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“bootfile” on page 3037
•“clear ip dhcp binding” on page 3038
•“default-router” on page 3039
•“dns-server” on page 3040
•“domain-name” on page 3041
•“host (DHCP)” on page 3042
•“host client-id” on page 3043
•“ip address dhcp” on page 3045
•“ip dhcp bootp ignore” on page 3047
•“ip dhcp leasequery enable” on page 3048
•“ip dhcp option” on page 3049
•“ip dhcp pool” on page 3051
•“ip dhcp-client default-route distance” on page 3052
•“ip dhcp-client request vendor-identifying-specific” on page 3054
•“ip dhcp-client vendor-identifying-class” on page 3055
•“ip dhcp-relay agent-option” on page 3056
•“ip dhcp-relay agent-option checking” on page 3058