Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 693
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
VLAN
DATABASE
vlan database
Overview Use this command to enter the VLAN Configuration mode. You can then add or
delete a VLAN, or modify its values.
Syntax
vlan database
Mode Global Configuration
Example In the following example, note the change to VLAN Configuration mode from
Global Configuration mode:
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)#
Related
commands
vlan
Command
changes
Version 5.5.0-1.3: Support for up to 5 VLANs added to AR1050V

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English