C613-50631-01 Rev A Command Reference for IE340 Series 3228
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LLDP COMMANDS
LLDP
NOTIFICATIONS
lldp notifications
Overview This command enables the sending of LLDP SNMP notifications (traps) relating to
specified ports.
The no variant of this command disables the sending of LLDP SNMP notifications
for specified ports.
Syntax
lldp notifications
no lldp notifications
Default The sending of LLDP SNMP notifications is disabled by default.
Mode Interface Configuration
Examples To enable sending of LLDP SNMP notifications for ports 1.0.1 and 1.0.6, use the
commands:
awplus# configure terminal
awplus(config)# interface port1.0.1,port1.0.6
awplus(config-if)# lldp notifications
To disable sending of LLDP SNMP notifications for ports 1.0.1 and 1.0.6, use the
commands:
awplus# configure terminal
awplus(config)# interface port1.0.1,port1.0.6
awplus(config-if)# no lldp notifications
Related
commands
lldp notification-interval
show lldp interface
snmp-server enable trap
To Next Page
Loading...
Need help?
General
