Allied Telesis IE340 Series - debug pim dense-mode nsm

C613-50631-01 Rev A Command Reference for IE340 Series 1915
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
DEBUG
PIM DENSE-MODE NSM
debug pim dense-mode nsm
Overview This command enables debugging of PIM-DM interface with NSM.
The no variant of this command disables debugging of PIM-DM interface with
NSM.
Syntax
debug pim dense-mode nsm
no debug pim dense-mode nsm
Mode Privileged Exec and Global Configuration
Example
awplus# configure terminal
awplus(config)# debug pim dense-mode nsm
Related
commands
debug pim dense-mode all
debug pim dense-mode context
debug pim dense-mode decode
debug pim dense-mode encode
debug pim dense-mode fsm
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode vif