C613-50631-01 Rev A Command Reference for IE340 Series 327
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
TERMINAL
MONITOR
terminal monitor
Overview Use this command to display debugging output on a terminal.
To display the cursor after a line of debugging output, press the Enter key.
Use the command terminal no monitor or no terminal monitor to stop
displaying debugging output on the terminal. Alternatively, you can use the
timeout option to stop displaying debugging output on the terminal after a set
time.
Syntax
terminal monitor [<1-60>]
terminal no monitor
no terminal monitor
Default Disabled
Mode User Exec and Privileged Exec
Examples To display debugging output on a terminal, enter the command:
awplus# terminal monitor
To display debugging on the terminal for 60 seconds, enter the command:
awplus# terminal monitor 60
To stop displaying debugging output on the terminal, use the command:
awplus# no terminal monitor
Related
commands
All debug commands
Command
changes
Version 5.4.8-0.2: no terminal monitor added as an alias for terminal no monitor
Parameter Description
<1-60> Set a timeout between 1 and 60 seconds for terminal output.
To Next Page
Loading...
Need help?
General
