Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 485
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
SHOW
COUNTER LOG
show counter log
Overview This command displays log counter information.
Syntax
show counter log
Mode User Exec and Privileged Exec
Example To display the log counter information, use the command:
awplus# show counter log
Output Figure 10-1: Example output from the show counter log command
Related
commands
show log config
Log counters
Total Received ......... 2328
Total Received P0 ......... 0
Total Received P1 ......... 0
Total Received P2 ......... 1
Total Received P3 ......... 9
Total Received P4 ......... 32
Total Received P5 ......... 312
Total Received P6 ......... 1602
Total Received P7 ......... 372
Table 11: Parameters in output of the show counter log command
Parameter Description
Total Received Total number of messages received by the log
Total Received P0 Total number of Priority 0 (Emergency) messages
received
Total Received P1 Total number of Priority 1 (Alert) messages received
Total Received P2 Total number of Priority 2 (Critical) messages received
Total Received P3 Total number of Priority 3 (Error) messages received
Total Received P4 Total number of Priority 4 (Warning) messages received
Total Received P5 Total number of Priority 5 (Notice) messages received
Total Received P6 Total number of Priority 6 (Info) messages received
Total Received P7 Total number of Priority 7 (Debug) messages received

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English