Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2494
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOCAL RADIUS SERVER COMMANDS
SHOW
RADIUS LOCAL-SERVER STATISTICS
show radius local-server statistics
Overview Use this command to display statistics about the local RADIUS server.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show radius local-server statistics
Mode User Exec and Privileged Exec
Usage notes Both unknown usernames and invalid passwords will display as failed logins in the
show output.
Example The following command displays Local RADIUS server statistics.
awplus# show radius local-server statistics
Output
Related
commands
clear radius local-server statistics
radius-server local
server enable
server auth-port
Table 5: Example output from the show radius local-server statistics command
Server status : Run (administrative status is enable)
Enabled methods : MAC EAP-MD5 EAP-TLS EAP-PEAP
Available methods : MAC EAP-MD5 EAP-TLS EAP-PEAP
EAP trustpoints : local

Successes :1 Unknown NAS :0
Failed Logins :0 Invalid packet from NAS :0
Internal Error :0 Unknown Error :0

NAS : 127.0.0.1
Successes :0 Shared key mismatch :0
Failed Logins :0 Unknown RADIUS message :0
Unknown EAP message :0 Unknown EAP auth type :0
Corrupted packet :0
NAS : 192.168.1.61
Successes :0 Shared key mismatch :0
Failed Logins :0 Unknown RADIUS message :0
Unknown EAP message :0 Unknown EAP auth type :0
Corrupted packet :0

Username Successes Failures
Tom 1 0
admin 0 0

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English